Long run testing

We are testing long run prints on the BadPrinter2, that it is now close to the final design, in particular for the hotend carriage with a feature for easy replacement of the hotend.
The tests vary from a 200 micron layer about 8 hours printing time up to a 100 micron layer 27 hours print without problems.

image

image

image

image

Devilhead 2.0 (yzorg) / CC BY-NC-SA 3.0

Zombie Hunter Head (Sculptor) / CC BY-ND 3.0

Skyrim: Dawnguard Vampire Lord (Vsions) / CC BY 3.0